Thursday, November 4, 2010

Project: Lemonade Stand

As a family we enjoy getting up early every now and then on Saturday mornings, grabbing a donut  (or two), and hitting a few yard sales.  This summer  we went to one yard sale where there were two little girls selling lemonade.  The girls thought that was just about the coolest thing EVER. 

They asked John if he could build them their own stand. 

He agreed.  Thinking it might happen at some future point.  The girls were persistant though, and John drew up plans and had it built by the NEXT day :)  ... What a sweet Daddy!

Here is John putting his miter saw to good use building the frame.

The frame of the stand.  John's idea was to use fence pickets to make the front of the stand.  I think it looks great!  The girls wanted it to be pink ;-)

Particle board for the top, and (not shown) the bottom shelf.  Chalkboard paint for the top sign made out of another fence picket.

And the Goober-girls putting the stand to good use!  They sold orange punch, pink lemonade, and danishes.  I am looking forward to them using the stand many times in the future :)

Wednesday, November 3, 2010

iLoveToCreate: Poodle Skirt Sequins Application

The mission was to complete the poodle skirt in time for Halloween :)  I opted for the brilliant plan of making my girls poodle skirts this year for their costumes.  Not a bad idea, except that I don't know much about sewing clothing or following a sewing pattern.  Thankfully, I have friends that lent me their knowledge and moral support and helped me me complete the skirts.  I am looking forward to my next sewing project, it isn't as tough as it looks :)

So, I had the skirts done.  I found a poodle applique.  I got 1-1/2 yards each of sequin trim from the fabric store.  And I got out my bottle of Aleene's Fabric Fusion Permanent Dry Cleanable Fabric Adhesive.

I ironed on the poodle applique, then strung the sequins out in a way I liked.  I made a line of Fabric Adhesive exactly where I wanted the sequins to go. 

I found it best to work in sections, carefully applying the sequins.  I let it dry for a few hours.

And, here they are being put to use!  I do have to say, the Fabric Fusion is pretty strong stuff, and I like that it is clear and hides the areas where I added just a bit too much glue.  ;)  I am pretty sure that sequins is not going anywhere!

Thursday, October 7, 2010

Fabric Pumpkins| Fall Inspiration

I am trying to decide which fall decorations I *NEED* to make. 

This one is at the top of my list.  Danielle Thompson over at Thompson Family-Life has a really great tutorial for making them... and they don't look all that hard! 

Although I love her take with the suprising, non-traditional, vintage-y fabrics... I think I will try finding some more traditional fall fabrics for mine.  I am hoping mine come out as cute as hers!

Tuesday, October 5, 2010

4x4 Wooden Pumpkins|Fall Inspiration

One of the reasons I wanted to start this blog was to be able to keep some of the ideas and inspiration I find all over the web in one place.  I happened to see this cute and easy 4x4 pumpkins over at Crafts ReDesigned . 

4x4 wood posts, cut to different lengths, and painted orange. 
Distressed slightly.
Add wood as the stems and rafia.
So cute.

Monday, September 27, 2010

iLoveToCreate: Decoupaged Fabric Canvases

As part of my oldest daughter's room revamp, my husband and I created these fabric-covered canvases for her wall.  It ended up being sort of Andy Warhol-esque, and I am so happy with how it all turned out and looks on her freshly painted walls!

I started by gathering some supplies...
*fabric that coordinated with her room colors 
*4 - 11x14 art canvases from Michaels
*a few foam paint brushes and some paper cups
*I also used a rotary cutter and cutting mat, however you could also use fabric scissors
***(not pictured) stencils of desired artwork, pencil, thin paint brush, and latex paint

Lay out the fabric and canvas, cut a rectangle of fabric larger than the canvas by a few inches.  This doesn't need to be precise (I used the rotary cutter), the edges will not be seen on the back.

 I grabbed my bottle of Collage Pauge decoupage.  In this case I used the matte finish.  If you have never used a decoupage product, it is a glue, sealer, and finishing top-coat all in one. Very cool.  Very addicting.  I find myself looking for items to decoupage.  Just saying... you might be seeing a few more projects featured on the blog using this product in the near future. 
Paint a generous coat of the decoupage directly onto the canvas.

 Place the fabric on top of the decoupaged canvas.  Smooth out any wrinkles or bubbles.  This product has a tendancy to bubble up, so be aware and smooth out accordingly.

Paint another generous coat (or two) of the decoupage directly on top of the fabric. 

Cut in from the corners of the extra fabric to the outer edge of the canvas, then cut straight up the sides.  Basically, you need a square cut out from each corner in order to decoupage the fabric to the sides of the canvas.

Gently flip the fabric back and paint the edge of the canvas with the decopauge.  Flip the fabric back down and smooth by pulling it tightly around the edge.  Seal with another coat of decoupage over the fabric.  Repeat around all four sides of the canvas, and then again to the back of the canvas.
*I usually get my fingers pretty sticky at this point.  I found that by pulling and smoothing the fabric as tighly as I could around the edges and back I prevented as many wrinkles and bubbles as possible.

Wait until all fabric-covered canvases are dry.  I waited at least 24 hours before moving onto the next step.

Find a stencil or object(s) you would like to use as your artwork and trace it onto the dry canvases. 

 Take a small paintbrush and paint in the traced lines.  I found that using latex paint worked far better than using acrylic paint.  Also, the decoupage made a great surface for the paint.  No bleeding over the lines!

A few shots of the finished products...

And finally, proudly displayed on the wall.  Lovingly refered to as 'the Birds' :)

Sunday, September 26, 2010

Flash-Frozen Plums

We have done a good job this summer of taking advantage of the wonderful produce that has been available.  We have made a ton of fruit salads, but we have also made an effort to freeze a lot of fruit for later use in smoothies. 

In order to keep fruit from sticking together when you freeze it, you are supposed to 'flash freeze' it on cookie sheets for an hour or two and then put it in ziploc-style bags for future use.  It is as easy as it looks... just rinse and cut your fruit, then space it out on a cookie sheet and freeze.
[Side note: always label the bags of fruit with what they are and the date they were frozen.  Sometimes it is hard to tell how long something has been in the freezer.] 

We got a whole box of great plums a few weeks ago and were not going to be able to eat them all before they went bad.  John thought it would be a good idea to use the apple wedger to cut them.  When he did, they didn't cut all the way through.  We were left with great flower of plum which looked really neat on the cookie sheets... so of course I had to snap a few photos.  =) 

Sunday, September 12, 2010

iLoveToCreate: Tie-Dye techniques class

I am not one to pass up an opportunity to learn new techniques for fun crafts.  A month (or so) ago, I was invited to attend a tie-dye class put on by the iLoveToCreate team!  I just supplied my own item to dye and used a Tye-dye kit that I had received as part of a give away. 
We all layed our kits and items to die out on the table.  Here are a few pointers...

A kit is a great way to get most of the supplies you will need: Bottles of powder dye (just add water), Gloves, Rubber Bands, Idea sheet and instructions

A tie-dye kit will make multiple items, there are a variety of items you could create: T-shirts, tanks, dresses, pants, skirts, shorts, swim cover or towels, etc.!

You should plan on having a few extra supplies on hand: Gallon sized plastic bags (Ziploc style); cover or tablecloth to cover your work surface; Apron; Water to dampen items before dyeing

There are a few different techniques we learned about.  Here is what I will call the "scrunching" method.  (I have no idea what it is really supposed to be called.)  Literally, just lay the shirt flat, then SCRUNCH it into a wrinkly little ball by pinching it together in various areas.
Then just squeeze on the dye. 
This is more of a "traditional" dyeing technique.  Squeeze the shirt into a long snake,  tie a number of rubber bands around it tightly.
Use the bottles of dye and squeeze liberally onto the untied portion of the shirt.
Whenever an item is done, place it in a plastic bag.  The dye needs to soak for a whole day before being rinsed. 
Here is one of the finished, rinsed, and washed shirts I made using a basic tie dye method.  I think it came out cute, although next time I will soak it with a little more dye and maybe let it set for 48 hours to make sure the colors stay a little more vibrant.

This is called "Shibori"
You take the item to be dyed and lay it onto a large cardboard tube.  Roll the fabric up, around the tube.
Once the item is all rolled around the tube, scrunch the fabric together pushing from the outside in. 
For this technique, you need to add your dye to a spray bottle.  Spray the dye onto the scrunched fabric. 
You will have to gently unroll the item and make sure the sprayed dye is soaking into the fabric.  You may have to take the item off the tube and roll it again on the other side. 

Pretty cool effect, huh?!!?
These are the great little bottles that come with the tie-dye kits.  Save these!  You might be able to use them for your next tie-dye project!!!
Related Posts Plugin for WordPress, Blogger...